**# Set Teminal type**

<code>DEFINE TERM "vt100"</code>

<code>SET TERMINAL /DEVICE=VT100 /WIDTH=80</code>

**# Exit almost anything:**

<code>CTRL-Z</code>

**# Reset pasword:**

<code>SET PASSWORD</code>

Or to change any users password

<code>RUN AUTHORIZE</code>
<code>MODIFY username /PASSWORD=newpassword</code>
<code>EXIT</code>

**# Add users**

<code>SET DEFAULT SYS$SYSTEM</code>
<code>RUN AUTHORIZE</code>
See what the next available user ID is. \\
<code>SHOW [200,*] /BRIEF</code>
<code>ADD JOE /PASSWORD=Secret123 /OWNER="Joe User" /DEV=DKA0: /DIR=[JOE] /UIC=[200,#] /FLAG=NODISUSER /PRIV=(TMPMBX,NETMBX) /DEFPRIV=(TMPMBX,NETMBX) /PGFLQUO=100000 /WSEXTENT=16384</code>

Set no password expiry
<code>MODIFY ANONYMOUS /NOPWDEXPIRED /NOPWDLIFETIME</code>

<code>EXIT</code>

Add the user DIR
<code>CREATE /DIRECTORY DKA0:[TESTUSER] /OWNER=[200,#]</code>

**# Change the prompt.**

<code>SET PROMPT="''F$GETSYI("NODENAME")' $ "</code>

**# Put this in to have it executed on every login.** 

<code>EDIT SYS$MANAGER:SYLOGIN.COM</code> 

**DISK Tasks**

**# Initialize (Format) drive:**

<code>INITIALIZE DKA500: SCRATCH /STRUCTURE=5</code>

**# Mount Drive on startup:** \\
**# Add to the end of** 

<code>@SYS$MANAGER:SYSTARTUP_VMS.COM</code>

<code>MOUNT/SYSTEM DKA500: SCRATCH</code>

**# Enter networking config:** \\

<code>@SYS$MANAGER:TCPIP$CONFIG</code>

**# Set default gateway:** \\

<code>TCPIP</code>

TCPIP><code>SET ROUTE /DEFAULT /GATEWAY=192.168.1.1</code>

Start Networking

<code>@SYS$STARTUP:TCPIP$STARTUP.COM</code>

**# Find and kill a process:**

<code>WRITE SYS$OUTPUT F$GETDVI("The thing to kill","PID")</code>
<code>STOP /ID=PID_FROM_ABOVE</code>

**# Drive operations**\\
Mount a CD
<code>MOUNT/OVERRIDE=IDENTIFICATION DKA100:</code>

Install a program kit
<code>@SYS$UPDATE:VMSINSTAL FORT066 DKA400:[FORT066.KIT]</code>
@SYS$TEST:FORTRAN$IVP

**# Security**

Show banned ip's
<code>SHOW INTRUSION</code>

Clear ban
<code>DELETE INTRUSION NTWORK"192.168.1.50"</code>
<code>DELETE INTRUSION TERMINAL"TWA1:"</code>

**# System startup file**

System boot

<code>EDIT SYS$MANAGER:SYSTARTUP_VMS.COM</code>

For user login:

<code>EDIT SYS$MANAGER:SYLOGIN.COM</code>