This is an old revision of the document!
# Set Teminal type
DEFINE TERM "vt100"
SET TERMINAL /DEVICE=VT100 /WIDTH=80
# Reset pasword:</code>
<code>SET PASSWORD</code>
Or to change any users password
<code>RUN AUTHORIZE</code>
<code>MODIFY username /PASSWORD=newpassword</code>
# Change the prompt.
<code>SET PROMPT=“''F$GETSYI(“NODENAME”)' $ ”</code>
# Put this in to have it executed on every login.
<code>EDIT SYS$MANAGER:SYLOGIN.COM</code>
DISK Tasks
# Initialize (Format) drive:
<code>INITIALIZE DKA500: SCRATCH /STRUCTURE=5</code>
# Mount Drive on startup:
# Add to the end of
<code>@SYS$MANAGER:SYSTARTUP_VMS.COM</code>
<code>MOUNT/SYSTEM DKA500: SCRATCH</code>
# Enter networking config:
<code>@SYS$MANAGER:TCPIP$CONFIG</code>
# Set default gateway:
<code>TCPIP</code>
TCPIP><code>SET ROUTE /DEFAULT /GATEWAY=192.168.1.1</code>
# Find and kill a process:**
WRITE SYS$OUTPUT F$GETDVI("The thing to kill","PID")
STOP /ID=PID_FROM_ABOVE