vax_vmx
This is an old revision of the document!
# Set Teminal type
DEFINE TERM "vt100"
SET TERMINAL /DEVICE=VT100 /WIDTH=80
# Reset pasword:
SET PASSWORD
Or to change any users password
RUN AUTHORIZE
See what the next available user ID is.
SHOW [200,*] /BRIEF
MODIFY username /PASSWORD=newpassword
EXIT
# Add users
SET DEFAULT SYS$SYSTEM
RUN AUTHORIZE
ADD JOE /PASSWORD=Secret123 /OWNER="Joe User" /DEV=DKA0: /DIR=[JOE] /UIC=[200,1] /FLAG=NODISUSER /PRIV=(TMPMBX,NETMBX) /DEFPRIV=(TMPMBX,NETMBX) /PGFLQUO=100000 /WSEXTENT=16384
# Change the prompt.
SET PROMPT="''F$GETSYI("NODENAME")' $ "
# Put this in to have it executed on every login.
EDIT SYS$MANAGER:SYLOGIN.COM
DISK Tasks
# Initialize (Format) drive:
INITIALIZE DKA500: SCRATCH /STRUCTURE=5
# Mount Drive on startup:
# Add to the end of
@SYS$MANAGER:SYSTARTUP_VMS.COM
MOUNT/SYSTEM DKA500: SCRATCH
# Enter networking config:
@SYS$MANAGER:TCPIP$CONFIG
# Set default gateway:
TCPIP
TCPIP>
SET ROUTE /DEFAULT /GATEWAY=192.168.1.1
# Find and kill a process:
WRITE SYS$OUTPUT F$GETDVI("The thing to kill","PID")
STOP /ID=PID_FROM_ABOVE
vax_vmx.1779671982.txt.gz · Last modified: by admin